Bednarcyk, B. A., Ricks, T. M., Pineda, E. J., Murthy, P. L., Mital, S. K., Hu, Z., & Gustafson, P. A. (2022). Thermal conductivity of 3D woven composite thermal protection system materials via multiscale recursive micromechanics. AIAA Journal (Submitted).

Gustafson, P. A., Pineda, E. J., Ricks, T. M., Bednarcyk, B. A., Hearley, B. L., & Stuckner, J. (2022). A convolutional neural network for enhancement of MultiScale localization in granular metallic representative unit cells. AIAA Journal (Submitted).

Jastifer, J. R., Gustafson, P. A., Silva, L. F., Noffsinger, S., & Coughlin, M. J. (2021). Nitinol, stainless steel, and titanium kirschner wire durability. Foot & Ankle Specialist, 14(4), 317–323. https://doi.org/10.1177/1938640020914677

John, S. C., Church, J. T., John, A. V., McLeod, J. S., Carr, B., Smith, S. M., Barnett, J. D., Dick, M., John, S. P., & Gustafson, P. A. (2021). Bubble bi-level ventilation facilitates gas exchange in anesthetized rabbits. Pediatric Research, 89(3), 1–7. https://doi.org/10.1038/s41390-020-0928-0

Silva, L. F., Yapor, F. A., Pineda, E. J., & Gustafson, P. A. (2020). Effect of material porosity on residual stress in an additive manufacturing simulation using the generalized method of cells. NASA Technical Memorandum. https://ntrs.nasa.gov/citations/20205000292

Jastifer, J. R., & Gustafson, P. A. (2019). 3D printing in orthopaedic surgery (M. DiPaola & M. Felasfa M. Wodajo, Eds.). Elsevier. https://doi.org/10.1016/B978-0-323-58118-9.00009-9

Jastifer, J. R., & Gustafson, P. A. (2019). Three-dimensional printing technology in foot and ankle surgery. In 3D printing in orthopaedic surgery (pp. 95–104). Elsevier. https://doi.org/10.1053/j.jfas.2016.01.052

Veenstra, J., Gustafson, P. A., Bearden, C., & Jastifer, J. R. (2018). The effect of pitch variation and diameter variation on screw pullout in 3D printed screws. Foot & Ankle Orthopaedics, 3(3), 2473011418S00503. https://doi.org/10.1177/2473011418S00503

Gustafson, P. A., Geeslin, A. G., Omwansa, M., & Sytsma, M. J. (2017). Clavicle fracture after coracoclavicular ligament reconstruction: A biomechanical and finite element evaluation of clavicle fracture risk. Orthopaedic Journal of Sports Medicine, 5(7_suppl6), 2325967117S00382. https://doi.org/10.1177/2325967117S00382

Jastifer, J. R., & Gustafson, P. A. (2017). Three-dimensional printing and surgical simulation for preoperative planning of deformity correction in foot and ankle surgery. The Journal of Foot and Ankle Surgery, 56(1), 191–195. https://doi.org/10.1053/j.jfas.2016.01.052

Jastifer, Gustafson, P. A., Jastifer, J. R., Gustafson, P. A., Labomascus, A., & Snoap, T. (2017). Ball and socket ankle: Mechanism and computational evidence of concept. The Journal of Foot and Ankle Surgery, 56(4), 773–775. https://doi.org/10.1053/j.jfas.2017.02.019

John, S. C., Barnett, J. D., Habben, N. D., Le, H. T., Cheng, E., John, S. P., & Gustafson, P. A. (2017). Development and testing of a bubble bi-level positive airway pressure system. Respiratory Care, 62(9), 1131–1136. https://doi.org/10.4187/respcare.05443

Jastifer, J. R., Alrafeek, S., Howard, P., Gustafson, P. A., & Coughlin, M. J. (2016). Biomechanical evaluation of strength and stiffness of subtalar joint arthrodesis screw constructs. Foot & Ankle International, 37(4), 419–426. https://doi.org/10.1177/1071100715619680

Yahamed, A., Ikonomov, P., Fleming, P. D., Pekarovicova, A., & Gustafson, P. (2016). Designed structures for bone replacement. Journal of Print and Media Technology Research, 5(4), 291–307.

Yahamed, A., Ikonomov, P., Fleming, P. D., Pekarovicova, A., Gustafson, P. A., Qwam Alden, A., & Alrafeek, S. (2016). Mechanical properties of 3D printed polymers. Journal of Print and Media Technology Research, 5(4), 273–289.

Jastifer, J. R., Toledo-Pereyra, L. H., & Gustafson, P. A. (2011). Galileo’s contribution to modern orthopaedics. Journal of Investigative Surgery : The Official Journal of the Academy of Surgical Research, 24(4), 141–144. https://doi.org/10.3109/08941939.2011.585293

Gustafson, P. A., & Waas, A. M. (2009). A bonded joint finite element for a symmetric double lap joint subjected to mechanical and thermal loads. International Journal of Numerical Methods in Engineering, 79(1). https://doi.org/10.1002/nme.2561

Gustafson, P. A., & Waas, A. M. (2009). The influence of adhesive constitutive parameters in cohesive zone finite element models of adhesively bonded joints. International Journal of Solids and Structures, 46(10), 2201–2215. https://doi.org/10.1016/j.ijsolstr.2008.11.016

Godlewski, L. A., Su, X., Allison, J. E., Gustafson, P. A., & Pollock, T. M. (2006). A test method for quantifying residual stress due to heat treatment in metals. SAE Transactions Journal of Materials and Manufacturing, V115-5, 273–280. https://doi.org/10.4271/2006-01-0319

Harris, S. J., O’Neill, A. E., Gustafson, P. A., Boileau, J., Yang, W., Weber, W. H., Majumdar, B., & Ghosh, S. (2004). Measurement of the state of stress in silicon with micro-Raman spectroscopy. Journal of Applied Physics, 96(12), 7195–7201. https://doi.org/10.1063/1.1808244

Jastifer, J. R., & Gustafson, P. A. (2014). The subtalar joint: Biomechanics and functional representations in the literature. The Foot, 24(4), 203–209. https://doi.org/10.1016/j.foot.2014.06.003

Tensmeyer, D. F., Gustafson, P. A., Jastifer, J. R., Patel, B., & Chess, J. L. (2015). The effect of load obliquity on the strength of locking and nonlocking constructs in synthetic osteoporotic bone. Medical Engineering & Physics, 37(11), 1047–1052. https://doi.org/10.1016/j.medengphy.2015.08.010

John, S. C., John, A. V., Moss, A. W., Gustafson, P. A., Silva, L. F., & John, S. P. (2020). Bench testing of a bubble non-invasive positive pressure ventilation device in an infant lung simulator. Respiratory Care, 65(9), 1339–1345. https://doi.org/10.4187/respcare.07346

Bovid, K. M., Habeck, J. M., Kohler, E., & Gustafson, P. A. (2019). Utilization of a 3-d printed model for preoperative planning and operative osteotomy of a pediatric cubitus varus deformity. Journal of Shoulder and Elbow Surgery Open Access, 3(3), 219–224. https://doi.org/10.1016%2Fj.jses.2019.05.003

Gustafson, P. A., Veenstra, J. M., Bearden, C. C. R., & Jastifer, J. R. (2019). The effect of pitch variation and diameter variation on screw pullout. Foot & Ankle Specialist, 12(3), 258–263. https://doi.org/10.1177/1938640018789999

Gustafson, P. A., Geeslin, A. G., Prior, D. M., & Chess, J. L. (2016). Effect of real-time feedback on screw placement into synthetic cancellous bone. Journal of Orthopaedic Trauma, 30(8), e279–84. https://doi.org/10.1097/bot.0000000000000564

Gustafson, P. A., Bizard, A., & Waas, A. M. (2007). Dimensionless parameters in symmetric double lap joints: An orthotropic solution for thermomechanical loading. International Journal of Solids and Structures, 44(17), 5774–5795. https://doi.org/10.1016/j.ijsolstr.2007.01.025

Gustafson, P. A., & Waas, A. M. (2011). Experiments and cohesive zone model parameters for T650/AFR-PE-4/FM680-1 at high temperatures. Journal of Aerospace Engineering, 24(3), 285–297. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000083

Gustafson, P. A., Harris, S. J., O’Neill, A. E., & Waas, A. M. (2006). Measurement of biaxial stress states in silicon using micro-Raman spectroscopy. Journal of Applied Mechanics, 73(5), 745–751. https://doi.org/10.1115/1.2187527

Patel, B., Gustafson, P. A., & Jastifer, J. R. (2012). The effect of clavicle malunion on shoulder biomechanics; a computational study. Clinical Biomechanics, 27(5), 436–442. https://doi.org/10.1016/j.clinbiomech.2011.12.006

Gustafson, P. A., & Waas, A. M. (2006). Determining the response of glass filled nylon under elevated rate multiaxial loading. Polymer Testing, 25(4), 481–491. https://doi.org/10.1016/j.polymertesting.2006.02.004

Jastifer, J. R., Christianson, E., VanZweden, D., & Gustafson, P. A. (2019). Feasibility of transosseous nonarticular fixation of lisfranc injuries. Foot & Ankle International. https://doi.org/10.1177/1071100719830947

Jastifer, J. R., Gustafson, P. A., & Gorman III, R. (2013). Subtalar arthrodesis alignment: The effect on ankle biomechanics. Foot & Ankle International, 34(2), 244–250. https://doi.org/10.1177/1071100712464214

Stoesz, M., Gustafson, P. A., Patel, B., Jastifer, J. R., & Chess, J. L. (2014). Surgeon perception of cancellous screw fixation. Journal of Orthopaedic Trauma, 28(1), e1. https://doi.org/10.1097/bot.0b013e31829ef63b

Jastifer, J. R., Gustafson, P. A., Patell, B., & Uggen, C. (2012). Pectoralis major transfer for subscapularis deficiency: A computational study. Shoulder and Elbow, 4(1), 25–29. https://doi.org/10.1111%2Fj.1758-5740.2011.00161.x

Bednarcyk, B. A., Ricks, T. M., Pineda, E. J., Murthy, P. L., Mital, S. K., Hu, Z., & Gustafson, P. A. (2022). Thermal conductivity of 3D woven composite thermal protection system materials via multiscale recursive micromechanics.

Gustafson, P. A., Pineda, E. J., Ricks, T. M., Bednarcyk, B. A., Hearley, B. L., & Stuckner, J. (2022). A convolutional neural network for enhancement of MultiScale localization in granular metallic representative unit cells.

Silva, L. F., Pineda, E. J., & Gustafson, P. A. (2021). Experimental validation of multi-scale metal additive manufacturing simulations: Geometric trends.

Silva, L. F., Pineda, E. J., & Gustafson, P. A. (2021). Geometric sensitivity of residual fields in metal additive manufacturing.

Silva, L. F., Pineda, E. J., & Gustafson, P. A. (2021). Porosity model parameter effects on metal additive manufacturing simulations.

Sorini, A., Pineda, E. J., Stuckner, J., & Gustafson, P. A. (2021). A convolutional neural network for multiscale modeling of composite materials.

Jastifer, J. R., Silva, L. F., & Gustafson, P. A. (2020). Nitinol, stainless steel, and titanium kirschner wire durability.

Rittenhouse, J. L., & Gustafson, P. A. (2020). Modeling of artificial turf with the discrete element method.

Silva, L. F., Pineda, E. J., & Gustafson, P. A. (2020). Geometrical effects on residual stress and distortion in metal AM.

Silva, L. F., Yapor, F. A., Pineda, E. J., & Gustafson, P. A. (2020). Evolving material porosity on an additive manufacturing simulation with the generalized method of cells. https://doi.org/10.2514/6.2020-1124

Yapor, F. A., Pineda, E. J., Bednarcyk, B., & Gustafson, P. A. (2019). Integration of MAC/GMC into CalculiX, an open source finite element code. https://doi.org/10.2514/6.2019-0775

Gustafson, P. A. (2018). Does the past predict the future? A retrospective statistical analysis of lower level grades and program outcomes at graduation.

John, S. P., John, S. C., Barnett, J., Le, H. T., Habben, N. D., Cheng, E., Weiner, G., & Gustafson, P. A. (2018). Helping infants breathe: Design of a bubble biphasic pap system. Pediatrics, 141(1_MeetingAbstract), 526–526.

Qwam Alden, A. Y., Geeslin, A. G., & Gustafson, P. A. (2018). Validation of a finite element model of the mechanical performance of surgical knot of varying topology.

Qwam Alden, A. Y., & Gustafson, P. A. (2018). Effect of knot configuration on the mechanical performance of a multifilament surgical suture.

Qwam Alden, A. Y., & Gustafson, P. A. (2018). Validated finite element model of a monofilament surgical knot.

Rittenhouse, J. L., & Gustafson, P. A. (2018). Modeling turf through discrete element analysis. Proceedings of the American Society for Composites—Thirty-Third Technical Conference.

Gustafson, P. A., & Kahn, Z. (2017). Avare: The open source electronic flight bag for android.

John, S., & Gustafson, P. A. (2017). Collaborating to help infants breathe when resources are limited. Michigan Society for Respiratory Care Conference.

Qwam Alden, A. Y., Geeslin, A. G., King, J. C., & Gustafson, P. A. (2017). A finite element model of a surgical knot: Vols. Volume 3: Biomedical and Biotechnology Engineering.

Qwam Alden, A. Y., & Gustafson, P. A. (2017). Finite element simulation and experimental characterization of surgical knot performance.

Gustafson, P. A. (2016). Attend for professional development (no paper).

Gustafson, P. A. (2016). Invited for international development networking.

Gustafson, P. A. (2016). Invited presentation of neovent.

Gustafson, P. A. (2014). Attend for professional development (no paper).

Kapenga, J. A., McKean, J., & Gustafson, P. A. (2014). R: An open source system for statistics and data exploration. AIAA Science and Technology Forum and Exposition.

Yahamed, A., Ikonomov, P., Fleming, D., Pekarovicova, A., & Gustafson, P. A. (2014). Bone structure by 3D printing. RAPID 2014 Conference and Exposition.

Gustafson, P. A. (2012).

Gustafson, P. A. (2012). Optimal wrap angles for composite pressure vessels part 2: Dynamic failure modes. Proceedings of the AIAA//// 53^rd Structures, Structural Dynamics, and Materials Conference, April 23–26, Honolulu HI.

Gustafson, P. A., Geeslin, A. G., Omwansa, M., & Sabesan, V. J. (2012). Risk of clavicle fracture following coracoclavicular ligament reconstruction for high grade acromioclavicular joint dislocations. ASME 2012 International Mechanical Engineering Congress & Exposition, Nov 9-15, Houston, TX.

Ji, W., Waas, A. M., Gustafson, P. A., Pineda, E. J., Prabhakar, P., & Raveendra, R. (2011). Computational modeling of π-joint failure including uncertainties in material and geometrical properties. Proceedings of the AIAA//// 52^nd Structures, Structural Dynamics, and Materials Conference, April 4–7, Denver CO.

Gustafson, P. A., & Waas, A. M. (2010). Predictions of delamination of a stiffened panel using a cohesive zone model. Proceedings of the AIAA//// 51^st Structures, Structural Dynamics, and Materials Conference, April 12–15, Orlando FL.

Patel, B., Gustafson, P. A., & Jastifer, J. (2010). The stiffness of locking and conventional plates in the fixation of distal fibula fractures; a finite element study. ASME 2010 International Mechanical Engineering Congress & Exposition, Nov 12-18, Vancouver, BC.

Collier, C., Yarrington, P., Gustafson, P. A., & Bednarcyk, B. (2009). Local post buckling: An efficient analysis approach for industry use. Proceedings of the AIAA//// 50^th Structures, Structural Dynamics, and Materials Conference, May 4–7, Palm Spring CA.

Chen, X., Su, X., Gustafson, P. A., & Allison, J. E. (2008). Numerical analysis of thermal growth of cast aluminum engine components. SAE World Congress & Exhibition, April, Detroit, MI, USA.

Gustafson, P. A., & Waas, A. M. (2008). Efficient and robust traction laws for the modeling of adhesively bonded joints. Proceedings of the AIAA//// 49^th Structures, Structural Dynamics, and Materials Conference, Apr 7-10, Schaumburg, IL.

Gustafson, P. A., & Waas, A. M. (2007). A macroscopic finite element for a symmetric doublelap joint subjected to mechanical and thermal loading. Proceedings of the AIAA//// 48^th Structures, Structural Dynamics, and Materials Conference, Apr 23-26, Honolulu HI.

Gustafson, P. A., & Waas, A. M. (2007). T650// critical energy release rate at high temperatures: Experiments and numerical models. Proceedings of the AIAA//// 48^th Structures, Structural Dynamics, and Materials Conference, Apr 23-26, Honolulu HI.

Godlewski, L. A., Su, X., Allison, J. E., Gustafson, P. A., & Pollock, T. M. (2006). A test method for quantifying residual stress due to heat treatment in metals. SAE World Congress & Exhibition, April, Detroit, MI, USA.

Gustafson, P. A., Bizard, A., & Waas, A. M. (2006). Dimensionless parameters in symmetric double lap joints: An orthotropic solution for thermomechanical loading. Proceedings of the AIAA//// 47^th Structures, Structural Dynamics, and Materials Conference, May 1-4, Newport RI.

Gustafson, P. A., & Waas, A. M. (2006). A macroscopic joint finite element for a symmetric double lap joint. Proceedings of the American Society of Composites 21^st Annual Technical Conference.

González, L., Godlewski, T. E., Gustafson, P. A., & Fernholz, K. E. (2005). Impact behavior of thermoplastic film laminates. The 8th International Coatings for Plastics Symposium, Troy MI (Invited).

González, L., Godlewski, T. E., Harris, A. M., Fernholz, K. E., & Gustafson, P. A. (2005). The role of decoration on the impact response of exterior TPOs. TPOs in Automotive (Invited) Geneva.

González, L., Godlewski, T. E., Harris, A. M., Fernholz, K. E., & Gustafson, P. A. (2005). The role of surfaces on the impact response of polymers. SPE’s Annual Technical Conference. Boston MA.

Harris, S., O’Neill, A., Yang, W., Gustafson, P. A., Boileau, J., Weber, W., & Majumdar, S., B. an d Ghosh. (2005). Measurement of the full state of stress of silicon with micro-raman spectroscopy. In Bulletin of the American Physical Society. APS.

González, L., Godlewski, T. E., Gustafson, P. A., & Fernholz, K. E. (2004). Impact behavior of thermoplastic film laminates for exterior automotive applications. TPOs in Automotive, Barcelona Spain. (Invited) Also presented at: SPE Automotive TPO Global Conference, Dearborn MI. Published in Both Conference Proceedings.

Alrafeek, S., Jastifer, J. R., & Gustafson, P. A. (2018). A stochastic finite element method for simulating trabecular bone.

Alrafeek, S., Jastifer, J. R., & Gustafson, P. A. (2018). A stochastic structural finite element model for trabecular bone and other structural foams.

Rittenhouse, J. L., & Gustafson, P. A. (2018). Modeling turf through discrete element analysis.

Alden, A. Y. Q., Geeslin, A. G., STRYKER, H., & Gustafson, P. (2018). Validation of a finite element model of the mechanical performance of surgical knots of varying topology. Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition, Pittsburgh, Pennsylvania, 1–9.

Bednarcyk, B. A., Ricks, T. M., Pineda, E. J., Murthy, P. L., Mital, S. K., Hu, Z., & Gustafson, P. A. (2022). Thermal conductivity of 3D woven composite thermal protection system materials via multiscale recursive micromechanics. AIAA SCITECH 2022 Forum, 2280.

Fernholz, K., Godlewski, T., Gonzalez, L., Gustafson, P., & Harris, A. (2005). The role of surfaces on the impact response of polymers. ANTEC-CONFERENCE PROCEEDINGS-, 6, 135.

González, L., Godlewski, T. E., Wooten, B., & Gustafson, P. A. (2004). Mechanical behavior of thermoplastic olefins (TPOs) during three-point bend impact. Society of Plastics Engineers Annual Technical Conference, Chicago IL, 2, 2201–2205.

Gustafson, P. A. (2012). Comparison of stress and strain based iteration for fiber tailoring of bolted composite plates. Proceedings of the AIAA//// 53^rd Structures, Structural Dynamics, and Materials Conference, April 23–26, Honolulu HI, 1371.

Gustafson, P. A. (2011). Fiber tailoring for durability improvement of bolted composite plates. Proceedings of the AIAA//// 52^nd Structures, Structural Dynamics, and Materials Conference, April 4–7, Denver CO, 2047.

Gustafson, P. A. (2012). Optimal wrap angles for composite pressure vessels part 1: Static orthogonal arrays. Proceedings of the AIAA//// 53^rd Structures, Structural Dynamics, and Materials Conference, April 23–26, Honolulu HI, 1600.

Gustafson, P. A., Geeslin, A. G., & Jastifer, J. R. (2016). An open source reverse engineering workflow: Geometry to optimization. AIAA Science and Technology Forum and Exposition, 1238.

Gustafson, P. A., Jastifer, J. R., Kapenga, J. A., & McKean, J. (2014). Lack of statistical rigor in composite materials experimentation and lessons learned from the science of medicine. AIAA Science and Technology Forum and Exposition, 1201.

Gustafson, P. A., & Kapenga, J. A. (2014). Implementation of the CUDA cusp and CHOLMOD solvers in CalculiX. AIAA Science and Technology Forum and Exposition, 0346.

Gustafson, P. A., Omwansa, M., Geeslin, A. G., & Sabesan, V. J. (2012). Risk of clavicle fracture following coracoclavicular ligament reconstruction for high grade acromioclavicular joint dislocations. ASME International Mechanical Engineering Congress and Exposition, 45189, 305–315.

Gustafson, P. A., Pineda, E. J., Stuckner, J., & Arnold, S. M. (2022). Multi-scale structural analysis enhanced by machine learning with applications to 3D printed aerospace structures. AIAA SCITECH 2022 Forum, 0078.

Gustafson, P. A., & Waas, A. M. (2008). Efficient and robust traction laws for the modeling of adhesively bonded joints. 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 16th AIAA/ASME/AHS Adaptive Structures Conference, 10th AIAA Non-Deterministic Approaches Conference, 9th AIAA Gossamer Spacecraft Forum, 4th AIAA Multidisciplinary Design Optimization Specialists Conference, 1847.

Gustafson, P. A., Yapor Genao, F. A., Bednarcyk, B. A., & Pineda, E. J. (2019). Integration of MAC/GMC into CalculiX, an open source finite element code. AIAA Scitech 2019 Forum, 0775.

Gustafson, P., & Waas, A. (2010). Predictions of delamination of a stiffened panel using a cohesive zone model. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 18th AIAA/ASME/AHS Adaptive Structures Conference 12th, 2617.

Gustafson, P., & Waas, A. (2007). T650/AFR-PE-4/FM680-1 mode i critical energy release rate at high temperatures: Experiments and numerical models. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2305.

Jastifer, J. R., Gustafson, P. A., & Gorman III, R. (2012). The effect of subtalar arthrodesis alignment on ankle biomechanics. ASME 2012 International Mechanical Engineering Congress & Exposition, Nov 9-15, Houston, TX, 45189, 317–323.

Ji, W., Waas, A., Rittenhouse, J. L., Ng, W., Pineda, E., Prabhakar, P., & Raveendra, R. (2011). Computational modeling of failure in composite structures including uncertainties in material and geometrical properties. 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 19th AIAA/ASME/AHS Adaptive Structures Conference 13t, 1722.

Kapenga, J. A., McKean, J., & Gustafson, P. A. (2014). R: An opensource system for statistics and data exploration. 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, 0349.

Patel, B., Gustafson, P. A., & Jastifer, J. (2010). Stiffness of locking and conventional plates in fixation of distal fibula fractures: A finite element study. ASME International Mechanical Engineering Congress and Exposition, 44267, 449–464.

Pineda, E. J., Silva, L. F., & Gustafson, P. A. (2021). Geometric requirements for modeling polycrystalline representative volume element using the generalized method of cells. AIAA Scitech 2021 Forum, 1231.

Qwam Alden, A. Y., Geeslin, A. G., & Gustafson, P. A. (2018). Validation of a finite element model of the mechanical performance of surgical knots of varying topology. ASME International Mechanical Engineering Congress and Exposition, 52026, V003T04A055.

Rittenhouse, J. L., & Gustafson, P. A. (2020). Validation of two open source discrete element software packages against theoretical benchmarks. ASME International Mechanical Engineering Congress and Exposition, 84577, V009T09A021.

Silva, L. F., Pineda, E. J., & Gustafson, P. A. (2021). Geometric sensitivity of residual fields in metal additive manufacturing. AIAA Scitech 2021 Forum, 1888.

Silva, L. F., Pineda, E. J., & Gustafson, P. A. (2021). Porosity model parameter effects on metal additive manufacturing simulations. AIAA Scitech 2021 Forum, 0670.

Silva, L. F., Yapor Genao, F. A., & Pineda, E. J. and. (2020). Evolving material porosity on an additive manufacturing simulation with the generalized method of cells. AIAA Scitech 2020 Forum, 1124.